By Anew Bathtub Repair
Rusted bathtub surface being professionally repaired by Anew Bathtub Repair in Reno, Nevada
Bathtub refinishing is an effective method to rejuvenate an old, stained, chipped, or outdated bathtub. Unlike replacing a whole tub, refinishing restores the existing tub with a new finish.
Many homeowners wonder: is bathtub refinishing safe?
Bathtub refinishing can be performed safely when the procedure is completed by a trained refinishing professional using appropriate protective, ventilation, and application equipment.
Anew Bathtub Repair specializes in bathtub refinishing and bathtub and shower repair in Reno, Sparks, Carson City, and surrounding Northern Nevada cities.
What Does Bathtub Refinishing Entail?
Before and after bathtub refinishing. Left side is before: a rusty and worn out bathtub. Right side is after: clean and refinished bathtub.
Bathtub refinishing (also known as resurfacing or reglazing) involves preparing and coating an existing surface of a bathtub.
Typically, the procedure may include the following:
- Bathtub cleaning
- Bathtub repair
- Chips and rust removal
- Bathtub surface preparation
- Covering the nearby areas
- Installation of the ventilation system
- Application of special coatings
- Dryout the bathtub
Since the material used during refinishing needs to bond with the surface, correct preparation and professional treatment is important.
Anew Bathtub Repair ensures that the working area is prepared, the surface is correctly prepared, and the bathroom is properly ventilated during the refinishing process.
Is Bathtub Refinishing Safe for Homeowners?
Bathtub refinishing is safe for homeowners if the bathroom is properly ventilated and the procedure is done in the right way.
While applying the products, the person may experience strong odor or fumes. It is recommended that homeowners, children, pets, and other residents stay away from the bathroom during the process of refinishing.
A professional should:
- Ventilate the bathroom
- Eliminate fumes to the outside
- Protect surrounding areas
- Wear proper safety equipment
- Prevent people and pets from getting into the work area
- Provide detailed curing instructions
Once the bathroom is ventilated, and the finish cures for the recommended period of time, the bathtub can be used again.
Why Is Proper Ventilation Important?
Proper ventilation is one of the most important stages of a safe bathtub refinishing process. During the preparation and application of the material there can be strong smells and fumes created.
If the bathroom is not properly ventilated, the fumes may remain inside the bathroom and may even get into other rooms of the house.
Ventilation equipment will help to eliminate the fumes and smells from the bathroom. Depending on the layout of the bathroom, extra ventilation can be made by opening the windows.
Anew Bathtub Repair analyzes the work area and makes sure to use proper ventilation during bathtub refinishing projects in Reno, Sparks and surrounding cities.
Why Professional Refinishing Is Better Than DIY Refinishing?
Refinishing kits can be cheaper than hiring a professional to do the job but it may be harder to apply them safely and properly.
Without ventilation, protective equipment, and surface preparation, DIY refinishing projects may lead to the exposure to fumes and low-quality finish.
Some of the common issues related to DIY refinishes include:
- Inappropriate ventilation
- Incorrect surface preparation
- Uneven application
- Bruch or roller marks
- Peeling
- Coating failure around the drain
- More expenses for further repairs
Professional bathtub refinishing is a much better choice because we know how to prepare the surface, apply the materials, ventilate the room, and protect surrounding areas.
Anew Bathtub Repair also fixes the chips, rust, cracks, and worn areas before applying the finish.
When Can You Start Using a Refinished Bathtub?
After the refinishing, it is necessary that the surface be dry while curing.
Usually, Anew Bathtub Repair suggests that it would be better to wait for 48 hours until you start using the newly refinished bathtub unless different recommendations are given in this particular case.
If you use the tub immediately, it may affect the curing of the surface and may cause marks.
Make sure to follow the curing instructions. It will help you to prolong the lifespan of your bathtub.
Is a Refinished Bathtub Safe to Use?
Yes. When the finish is completely cured, a professionally refinished bathtub can be used for bathing and regular activities in a household.
However, refinished surfaces should be cleaned carefully. Chemicals and abrasion may damage the finish.
To keep your refinished bathtub in good condition:
- Use only non-abrasive cleaners
- Do not use steel wool and scrub pads
- Do not use abrasive cleaning powder
- Fix leaking faucet quickly
- Do not leave wet bath mats in the tub
- Do not use mats with rubber suction cups or rubber feet
- Do not put metal cans and sharp objects on the bathtub ledge
- Clean soap and cleaner residues from the surface
Anew Bathtub Repair suggests non-abrasive cleaners like Lysol Basin Tub & Tile, Dow, Fantastik, or Mr. Clean Liquid (when using according to manufacturer’s instructions).
Right cleaning and maintenance will help your tub to be beautiful for many years.
Who Should Stay Away From the Work Area?
It is better if children, pets and everyone sensitive to strong odors stay away from the bathroom during the process of refinishing and while airing the room.
If a person suffers from asthma, lung or chemical sensitivity, it is necessary to consult a doctor before staying in the house where refinishing is done.
Pets should also be kept away from the bathroom since birds and other animals may react stronger to the smell and fumes.
Once the refinishing is finished, the bathroom is aired, and the coating is cured, the bathtub can be used according to instructions.
Is Your Bathtub Suitable for Refinishing?
Refinishing is suitable when the bathtub is structurally sound but there are some aesthetic or surface defects.
Refinishing will help with:
- Stains
- Discolorations
- Minor chips
- Scratches
- Dull finish
- Outdated colors
- Light rust
- Fiberglass damage
The replacement of the tub may be needed in case of serious corrosion, large cracks and holes, leaks or structural damages.
Anew Bathtub Repair can help you to assess the condition of your bathtub and recommend what should be done.
Safe Bathtub Refinishing in Reno and Sparks
Refinishing can be a safe and convenient way to improve the appearance of the existing bathtub if it is done by a professional.
Ventilation, protective equipment, surface preparation, professional application, and correct curing period are the key elements of the process.
Anew Bathtub Repair can repair, resurface, and reglaze bathtubs, showers, sinks, fiberglass surrounds, countertops, tiles, chips, cracks, rust and worn surfaces.
We provide our services to homeowners, property managers, apartments, hotels, and real estate professionals in Reno, Sparks, Spanish Springs, Sun Valley, Carson City, Minden, Gardnerville, Incline Village, South Lake Tahoe, Truckee, and surrounding areas.
Do you need a professional bathtub or shower refinishing in Reno or Sparks? Contact Anew Bathtub Repair at 775-476-2639 or visit anewbathtubrepair.com for a quote.
